The AP10C150M is a NP-Channel metal-oxide semiconductor field-effect transistor (MOSFET) is the most common type of field-effect transistor (FET). This transistor has a three-terminal device with Gate (G), Drain (D) and Source (S) terminals.
Circuit diagram symbol of the AP10C150M transistor as follows.
| Transistor Code | AP10C150M | |
|---|---|---|
| Transistor Type | MOSFET | |
| Control Channel Type | NP-Channel | |
| Package | SO8 | |
| Drain-Source Voltage (Maximum) | VDS | 100V |
| Gate-Source Voltage (Maximum) | VGS | 20V |
| Drain Current (Maximum) | ID | 2.5A |
| Drain-Source On-State Resistance (Maximum) | RDS(on) | 0.16Ohm |
| Power Dissipation (Maximum) | PD | 2W |
| Drain-Source Capacitance | 60pF | |
| Rise Time | 4nS | |
| Gate-Threshold Voltage (Maximum) | 3V | |
Followings are the key electrical characteristics of the AP10C150M MOSFET transistor
The maximum drain-source voltage that can safely block between drain and source in AP10C150M MOSFET transistor is 100V.
This is the highest voltage the MOSFET transistor can safely block between the drain and source without damadging to the transistor.
The maximum safe voltage that can be used between the gate and source of the AP10C150M MOSFET transistor is 20V without any harm. This limit should not be exceeded to prevent damage from the gate voltage.
The maximum continuous current flowing between the drain and source of the AP10C150M MOSFET transistor is 2.5A. This is the highest current that can safely flow between drain and source without damaging the MOSFET transistor.
The internal resistance between the drain and source of AP10C150M MOSFET transistor when the transistor is fully turned on is 0.16 Ohm that defines the amount of lost power that is wasted as heat when the transistor is operating.
The maximum power that the AP10C150M MOSFET transistor can comfortably transfer into heat without breaking is 2W. This indicates the amount of power that can safely be dissipated to the device as heat.
The capacitance between drain and source of the AP10C150M MOSFET transistor is 60pF. This value influences to the switching speed of the AP10C150M MOSFET transistor and the high-frequency performance.
This is the ability to hold a small electric charge between the drain and source of a MOSFET transistor, like a tiny built-in capacitor.
The time that the drain current or output voltage increases between low to high when the AP10C150M MOSFET transistor is switched on is 4nS. This is the rate at which AP10C150M MOSFET transistor switches on.
This shows how fast the MOSFET transistor switched on.
UXPython is not the creator or an official representative of the AP10C150M MOSFET transistor. You can download the official AP10C150M MOSFET transistor datasheet to get more infromation about this transistor.
Note : Copyrighted materials belong to their creator or official representative.