free stats

Home » Electronics » FET » AOP609 Transistor

AOP609 MOSFET Transistor

The AOP609 is a NP-Channel metal-oxide semiconductor field-effect transistor (MOSFET) is the most common type of field-effect transistor (FET). This transistor has a three-terminal device with Gate (G), Drain (D) and Source (S) terminals.

Circuit diagram symbol of the AOP609 transistor as follows.

Circuit diagram symbol of the AOP609 transistor

AOP609 Transistor Specification

Transistor Code AOP609
Transistor Type MOSFET
Control Channel Type NP-Channel
Package PDIP-8
Drain-Source Voltage (Maximum) VDS 60V
Gate-Source Voltage (Maximum) VGS 20V
Drain Current (Maximum) ID 4.7(3.5)A
Drain-Source On-State Resistance (Maximum) RDS(on) 0.06(0.115)Ohm
Power Dissipation (Maximum) PD 2.5W
Drain-Source Capacitance 74(88)pF
Operating Junction Temperature (Maximum) 150°C
Rise Time 5.5(7.2)nS
Gate-Threshold Voltage (Maximum) 3V

AOP609 MOSFET Transistor Overview

Key Electrical Characteristics of the AOP609 MOSFET

Followings are the key electrical characteristics of the AOP609 MOSFET transistor

  • Maximum Drain-Source Voltage (VDS)

    • The maximum drain-source voltage that can safely block between drain and source in AOP609 MOSFET transistor is 60V.

    This is the highest voltage the MOSFET transistor can safely block between the drain and source without damadging to the transistor.

  • Maximum Gate-Source Voltage (VGS)

    • The maximum safe voltage that can be used between the gate and source of the AOP609 MOSFET transistor is 20V without any harm. This limit should not be exceeded to prevent damage from the gate voltage.

  • Maximum Drain Current (ID)

    • The maximum continuous current flowing between the drain and source of the AOP609 MOSFET transistor is 4.7(3.5)A. This is the highest current that can safely flow between drain and source without damaging the MOSFET transistor.

  • Drain-Source On-State Resistance (RDS(on))

    • The internal resistance between the drain and source of AOP609 MOSFET transistor when the transistor is fully turned on is 0.06(0.115) Ohm that defines the amount of lost power that is wasted as heat when the transistor is operating.

  • Maximum Power Dissipation (PD)

    • The maximum power that the AOP609 MOSFET transistor can comfortably transfer into heat without breaking is 2.5W. This indicates the amount of power that can safely be dissipated to the device as heat.

  • Drain-Source Capacitance

    • The capacitance between drain and source of the AOP609 MOSFET transistor is 74(88)pF. This value influences to the switching speed of the AOP609 MOSFET transistor and the high-frequency performance.

    This is the ability to hold a small electric charge between the drain and source of a MOSFET transistor, like a tiny built-in capacitor.

  • Rise Time

    • The time that the drain current or output voltage increases between low to high when the AOP609 MOSFET transistor is switched on is 5.5(7.2)nS. This is the rate at which AOP609 MOSFET transistor switches on.

    This shows how fast the MOSFET transistor switched on.

Thermal Performance of the AOP609 MOSFET

  • Maximum Operating Junction Temperature

    • The maximum internal temperature of the semiconductor junction of AOP609 MOSFET transistor can be safely operated at the 150°C without damaging the transistor.

UXPython is not the creator or an official representative of the AOP609 MOSFET transistor. You can download the official AOP609 MOSFET transistor datasheet to get more infromation about this transistor.

Note : Copyrighted materials belong to their creator or official representative.

More Transistors Datasheets in NP-Channel MOSFET

AOP605 AOP605 MOSFET Transistor AP9960GD AP9960GD MOSFET Transistor AP9962AGD AP9962AGD MOSFET Transistor AP9971AGD AP9971AGD MOSFET Transistor AP9971GD AP9971GD MOSFET Transistor AP9973GD AP9973GD MOSFET Transistor QM6214Q QM6214Q MOSFET Transistor SSM2030SD SSM2030SD MOSFET Transistor SSM4501GSD SSM4501GSD MOSFET Transistor SSM9971GD SSM9971GD MOSFET Transistor