Home » Electronics » FET » AP9770GT-HF Transistor

AP9770GT-HF MOSFET Transistor

The AP9770GT-HF is a P-Channel metal-oxide semiconductor field-effect transistor (MOSFET) is the most common type of field-effect transistor (FET). This transistor has a three-terminal device with Gate (G), Drain (D) and Source (S) terminals.

Circuit diagram symbol of the AP9770GT-HF transistor as follows.

AP9770GT-HF Transistor Specification

Transistor Code		AP9770GT-HF
Transistor Type		MOSFET
Control Channel Type		P-Channel
Package		TO-92
Drain-Source Voltage (Maximum)	V_DS	60V
Gate-Source Voltage (Maximum)	V_GS	20V
Drain Current (Maximum)	I_D	1.5A
Drain-Source On-State Resistance (Maximum)	R_DS(on)	0.5Ohm
Power Dissipation (Maximum)	P_D	2.08W
Drain-Source Capacitance		60pF
Operating Junction Temperature (Maximum)		150°C
Rise Time		5.4nS

AP9770GT-HF MOSFET Transistor Overview

The AP9770GT-HF is a transistor, a MOSFET, used for on and off switching in electrical gadgets and power control applications. It is a P-Channel MOSFET, which means it conducts when a negative voltage is applied to the gate with respect to the source.

This device comes in a TO-92 package, making it suitable for projects that require low power handling and reliable switching performance.

Key Electrical Characteristics of the AP9770GT-HF MOSFET

Followings are the key electrical characteristics of the AP9770GT-HF MOSFET transistor

Maximum Drain-Source Voltage (V_DS)

The maximum drain-source voltage that can safely block between drain and source in AP9770GT-HF MOSFET transistor is 60V.

This is the highest voltage the MOSFET transistor can safely block between the drain and source without damadging to the transistor.

Maximum Gate-Source Voltage (V_GS)

The maximum safe voltage that can be used between the gate and source of the AP9770GT-HF MOSFET transistor is 20V without any harm. This limit should not be exceeded to prevent damage from the gate voltage.

Maximum Drain Current (I_D)

The maximum continuous current flowing between the drain and source of the AP9770GT-HF MOSFET transistor is 1.5A. This is the highest current that can safely flow between drain and source without damaging the MOSFET transistor.

Drain-Source On-State Resistance (R_DS(on))

The internal resistance between the drain and source of AP9770GT-HF MOSFET transistor when the transistor is fully turned on is 0.5 Ohm that defines the amount of lost power that is wasted as heat when the transistor is operating.

Maximum Power Dissipation (P_D)

The maximum power that the AP9770GT-HF MOSFET transistor can comfortably transfer into heat without breaking is 2.08W. This indicates the amount of power that can safely be dissipated to the device as heat.

Drain-Source Capacitance

The capacitance between drain and source of the AP9770GT-HF MOSFET transistor is 60pF. This value influences to the switching speed of the AP9770GT-HF MOSFET transistor and the high-frequency performance.

This is the ability to hold a small electric charge between the drain and source of a MOSFET transistor, like a tiny built-in capacitor.

Rise Time

The time that the drain current or output voltage increases between low to high when the AP9770GT-HF MOSFET transistor is switched on is 5.4nS. This is the rate at which AP9770GT-HF MOSFET transistor switches on.

This shows how fast the MOSFET transistor switched on.

Thermal Performance of the AP9770GT-HF MOSFET

Maximum Operating Junction Temperature

The maximum internal temperature of the semiconductor junction of AP9770GT-HF MOSFET transistor can be safely operated at the 150°C without damaging the transistor.

UXPython is not the creator or an official representative of the AP9770GT-HF MOSFET transistor. You can download the official AP9770GT-HF MOSFET transistor datasheet to get more infromation about this transistor.

Note : Copyrighted materials belong to their creator or official representative.