20P10 MOSFET Transistor

The 20P10 is a P-Channel metal-oxide semiconductor field-effect transistor (MOSFET) is the most common type of field-effect transistor (FET). This transistor has a three-terminal device with Gate (G), Drain (D) and Source (S) terminals.

Circuit diagram symbol of the 20P10 transistor as follows.

20P10 Transistor Specification

Transistor Code		20P10
Transistor Type		MOSFET
Control Channel Type		P-Channel
Package		TO220_TO251_TO252
Drain-Source Voltage (Maximum)	VDS	100V
Gate-Source Voltage (Maximum)	VGS	20V
Drain Current (Maximum)	ID	20A
Drain-Source On-State Resistance (Maximum)	RDS(on)	0.1Ohm
Power Dissipation (Maximum)	PD	85W
Drain-Source Capacitance		590pF
Operating Junction Temperature (Maximum)		150°C
Rise Time		73nS

20P10 MOSFET Transistor Overview

The 20P10 is a transistor, a MOSFET, used for on and off switching in electrical gadgets and power control applications. It is a P-Channel MOSFET, which means it conducts when a negative voltage is applied to the gate with respect to the source.

This device comes in a TO220_TO251_TO252 package, making it suitable for projects that require high power handling and reliable switching performance.

Key Electrical Characteristics of the 20P10 MOSFET

Followings are the key electrical characteristics of the 20P10 MOSFET transistor

• Maximum Drain-Source Voltage (V_DS)

The maximum drain-source voltage that can safely block between drain and source in 20P10 MOSFET transistor is 100V.

This is the highest voltage the MOSFET transistor can safely block between the drain and source without damadging to the transistor.

• Maximum Gate-Source Voltage (V_GS)

The maximum safe voltage that can be used between the gate and source of the 20P10 MOSFET transistor is 20V without any harm. This limit should not be exceeded to prevent damage from the gate voltage.

• Maximum Drain Current (I_D)

The maximum continuous current flowing between the drain and source of the 20P10 MOSFET transistor is 20A. This is the highest current that can safely flow between drain and source without damaging the MOSFET transistor.

• Drain-Source On-State Resistance (R_DS(on))

The internal resistance between the drain and source of 20P10 MOSFET transistor when the transistor is fully turned on is 0.1 Ohm that defines the amount of lost power that is wasted as heat when the transistor is operating.

• Maximum Power Dissipation (P_D)

The maximum power that the 20P10 MOSFET transistor can comfortably transfer into heat without breaking is 85W. This indicates the amount of power that can safely be dissipated to the device as heat.

• Drain-Source Capacitance

The capacitance between drain and source of the 20P10 MOSFET transistor is 590pF. This value influences to the switching speed of the 20P10 MOSFET transistor and the high-frequency performance.

This is the ability to hold a small electric charge between the drain and source of a MOSFET transistor, like a tiny built-in capacitor.

• Rise Time

The time that the drain current or output voltage increases between low to high when the 20P10 MOSFET transistor is switched on is 73nS. This is the rate at which 20P10 MOSFET transistor switches on.

This shows how fast the MOSFET transistor switched on.

Thermal Performance of the 20P10 MOSFET

• Maximum Operating Junction Temperature

The maximum internal temperature of the semiconductor junction of 20P10 MOSFET transistor can be safely operated at the 150°C without damaging the transistor.

UXPython is not the creator or an official representative of the 20P10 MOSFET transistor. You can download the official 20P10 MOSFET transistor datasheet to get more infromation about this transistor.

Note : Copyrighted materials belong to their creator or official representative.

More Transistors Datasheets in P-Channel MOSFET

30P10A MOSFET Transistor G110N06 MOSFET Transistor G120N04 MOSFET Transistor G80N06 MOSFET Transistor